產品說明:艾可瑞板式換熱器是由一組波紋金屬板組成,板上有孔,供傳熱的兩種液體通過。金屬板片安裝在一個側面有固定板和活動壓緊板的框架內,并用夾緊螺栓夾緊。板片上裝有密封墊片,將液體通道密封,并且引導流體交替地流至各自的通道內。液體的流量、物理性質、壓力降和溫度差決定了板片的數量尺寸,液體的化學性能、腐蝕特性決定了板片及膠墊的材質,不同的波紋板結構設計不公提高了湍流程度,并且形成許多支撐點,足以承受介質間的壓力差。
Product Description: Aike Rui plate heat exchanger is composed of a group of corrugated metal plate, perforated plate, two kinds of liquid for heat transfer through. The sheet metal is mounted in a frame with a fixed plate and a movable compression plate on the side and is clamped by a clamping bolt. The plate is provided with a gasket to seal the liquid passages and to guide fluid flow alternately to the respective passages. Flow, poor physical properties, pressure drop and liquid temperature determines the number of plate size, characteristics and chemical properties, corrosive liquid determines the plate and the rubber pad material, design of corrugated plate structure of different injustice improve the extent of turbulence, and the formation of many points of support, to withstand the pressure difference between the medium.
金屬板和活動壓緊板安裝在懸掛梁上,并由下導桿定位,而桿端則固定在支撐柱上,但如果其中一種液體或兩種液體在換熱器內不止通過一次,則接口應開在因定板和活動壓緊板上。
A metal plate and a movable plate is installed on the hanging beam, and the positioning guide rod, and the rod end is fixed on the support column, but if one of the two kinds of liquid or liquid in the heat exchanger through more than once, then the interface should be opened in the fixed plate and a movable plate.
板片波紋角度大小的合理搭配,可以較大提高單位換熱面積的換熱效果、調節液體的阻力、節省換熱面積,其結果降低投資成本,縮短投資回收時間。
The reasonable collocation of the plate waviness angle can greatly improve the heat exchange effect of the unit heat exchange area, regulate the resistance of the liquid and save the heat exchange area, and consequently reduce the investment cost and shorten the investment recovery time.
艾可瑞板式換熱器有AL系列、ATL系列、A系列、冷凝器、蒸發器、半焊工、全焊式等幾大系列百余種板型。各種型號都有深波紋、淺波紋、大角度、小角度等,完全確保滿足不同用戶的需要,特殊工況可按用戶需要專門設計制造。
Aike Rui heat exchanger AL series, ATL series, A series, condenser, evaporator, welder, semi welded plate for several hundred series. All kinds of models have deep ripple, shallow corrugation, big angle and small angle, etc., and fully meet the needs of different users. The special working conditions can be designed and manufactured according to the user's needs.
板片材料:
Sheet material:
不銹鋼:SUS304、316、316L、310S、904
Stainless steel: SUS304, 316, 316L, 310S, 904
鈦及鈦鈀合金:TAi、TAi-Pd
Ti and Ti Pd alloy: TAi, TAi - Pd
哈氏合金:C276、D205、B2G
Hastelloy: C276, D205, B2G
鎳:Ni200
Nickel: Ni200
鉬:254MO
Molybdenum: 254MO
產品參數:
Product parameter:
壓力范圍:不大于2.5MPa
Pressure range: no more than 2.5MPa
最大處理量:1500?/h
Maximum capacity: 1500 /h
最小處理量:1?/h
Minimum quantity: 1 /h
組裝面積范圍:800㎡
The assembly area: 800 square meters
溫度大體范圍:-50——350℃
Temperature range: -50 - 350 DEG C
最大接口:DN350
Max interface: DN350
最小接口:DN32
Minimum interface: DN32
熱負荷:10MW
Heat load: 10MW
板片厚度:0.5——0.8mm
Sheet thickness: 0.5 - 0.8mm